STOCK IMAGE
Auction Ended
ZEKOO 4FT -12 FT Bypass Sliding Barn Door Hardware Kit, Single Track, Double Wooden Doors Use, Flat Track Roller, One-Piece Rail Low Ceiling (6.6FT Single Track Bypass)
Sold
Appears New
QTY 1
$31.00
MSRP
MSRP is a sample online retail price.
$99.00
Last Update:
11/22/2024, 11:20 PM ESTItem Information
MSRP:
MSRP is a sample online retail price.
$99.00
Brand:
ZEKOO
Condition:
Appears New
Description:
ZEKOO Hardware have devoted to the development of barn door hardware over 10 years, improve and upgrade products to give each family the best choice Our instructions step by step with fractional measurements in inch, have detailed word instructions with pictures 1. Mark and drill track and bracket holes One-piece 6.6ft long sliding track without joints, Pre- drilled 16" apart holes on trackKeeping the tracks level is VERY IMPORTANT1 X 6.6FT track 2. Install the inside track use spacers and screws Our screw is 8.8 grade high strengh bearing capacity, fit for concrete wall and wooden wallIf your door is thicker than 1-3/4" or have doorway trim, we have 2'' spacer can free for you5 X 1-3/8'' spacers 3. Drill hole on door and attach inside door hanger Door weight capacity is 200lbThe single track bypass hardware is use for double door, door thickness is 1-3/8" ~ 1-3/4"2 X straight hangers 4. Drill hole on door and attach outside door hanger We have different bolts for your different thickness door if you need, we will free for you.2 X bending hangers Read more 5. Install Door Stoppers with wrench Stopper can prevent the door falling off from the track, one door have 2 stoppers, ensure the stability and safetyRubber covered, good damping effect, reduce the noiseUse 2 screws to fix stopper on track, it is very fasteningYou can put it on track where you want to stop your door, easy to remove if you want adjust2 X stoppers 6. Hang your door and install Anti-jump Pad on top of door Anti- jump Pad can prevent door to be lifted off rail, ensure the stability and safetyInside door use the circular anti-jump padsOutside door use the special production anti-jump pads4 X anti-jump pads 7. Adjusting your door the opening and closing positions then install floor guide Floor guide can prevent the door swinging out or up against the baseboard, let your door slide on same locusOur floor guide have 2 installation methodsIf you don't want to install on floor or slot in your door, we have different kinds of guides can help your project2 sets X floor guides 8. How to choose size? Track's length should be at least of the opening (you can use the track which is a little bit longer). For example, if your opening is 80'' wide, you will need at least 92'' long track, and please let your two door width than your opening about 10''-12''The gap between inner door&wall is about 5/8'' , the gap between two door panels is about 1-3/16'' ( based on door thickness: 1-9/16'' )Ceiling space from top of the door to ceiling only need 6'' Read more About some questions Q: Can i cut the track? A: Yes, you can cut it into any length of you want Q: How about If the studs don't line up with the pre-drilled holes in the rail or there is a doorway trim? A: You can add a headboard Q: How width from outside door to wall? A: It is 5'' Q: Do you accept customization? A: Yes, We are professional factory, accept mass customization About our product High purity bearing steel Gcr15 (Special material for bearing), nsure smooth sliding and stand wear and tear The material is heavy duty high carbon steel, thickness is 1/4'' We have large processing factory and advanced equipment? excellent professional design, production and workmanship Only the hardware is for sale, door is not included Single track bypass barn door hardware can help you save space, easy complements your kitchen, wardrobe, bathroom, bedroom, storeroom Read more
Model:
GCM5165
Lot Code:
ORG2010315
Width:
7.6 inches
Depth:
3.6 inches
Weight:
21.1 pounds
Length:
80.0 inches
Additional Info:
Appears New
Pickup Location:
7660 School Road, Cincinnati OH 45249
Auction Number
SCH2201495
