FLEDAVID

Appears New

FLEDAVID Outdoor Wall Light Fixtures with GFCI Outlet Our motion sensor outdoor lights are built with upgraded PIR motion sensor and dusk to dawn photocell. It has three modes to choose from, providing a personalized outdoor lighting solution for your life.Two GFCI (ground fault circuit interrupter) outlets bring you the convenience of powering up your outdoor. It is suitable for various scenarios, string lights, lawn mowers, BBQ grills, leaf blower and other outdoor equipment.Featured with a matte black aluminum frame and sturdy clear glass panes, this modern outdoor wall light fixture complements any decorations, while brightening your front door, entryway, doorway, foyer, corridor, balcony, patio, porch, garage, courtyard, hallway. Specifications: Finish Color: Matte blackMaterial: AluminiumVoltage: 110-125VProduct Size: 5.9"L 8.55"W 10.55"HBackplate Size: 4.84"L 5.78"HBase Type: E26 base, Max 100WLight Source: Incandescent or dimmable LED bulbs (NOT included)Certification: ETL / UL List About GFCI Outlet: Plugged the device into the GFCI outlet, if the device is not powered, please check as the following steps: 1) Please check whether the device is plugged into the GFCI outlet tightly. 2) If the device is connected into the GFCI outlet correctly but still does not work: A. Check whether the TEST button pops up and the Red LED indicator is always on. If so, it indicates that the connected device is short circuited, please unplug the device and correct the circuit fault. B. After troubleshooting, press the TEST button first, then press the RESET button, and then plugged the device, if the Green LED indicator flashes, it indicates that the GFCI outlet is working properly; if the TEST button pop up once again and the Red LED indicator is on again, it indicates that the device short circuit fault is not eliminated successfully, please repeat steps A to B. Important Note: 1. GFCI outlet is not waterproof, please protect the outlets out of water and keep both receptacle and any plugs dry. 2. Please test the outdoor outlet regularly. A complete test consists of pressing the TEST button once and pressing the RESET button once. Otherwise, the porch light with outlet plug will not turn on, and there will be no power output in the outlet. Our Advantage: Outdoor Weather Resistant The sensor wall lamp is uniquely designed for outdoor use and has passed the waterproof test, so it can withstand years of extreme weather, such as rainstorm, snowstorm, hurricane. Thickened Aluminum Material Our wall sconces are constructed heavy- duty rugged aluminum frame and clear glass panels, which can effectively protect the wall light fixtures from rust and corrosion for many years. UL List for Daily Safe Use The wall lamp uses a standard E26 base socket and has passed the UL safety test, which can effectively reduce the loss of the bulb and ensure your daily safe use. Read more 3 Lighting Modes: Auto High Mode The light turns on the HIGH mode by default. It will auto to 30% brightness at dusk, light on 100% brightness while triggered by motion, then back to 30% brightness after 120s without movement. Auto Low Mode Open the cover of the sensor, slide the paddle to switch to LOW mode. The light does not turn on at dusk, only lights up when motion is detected, and automatically turns off after 120 seconds when no motion is detected. Manual Override Mode In this mode, the light will be turned on and held for 8H, just turn the wall switch "off-on" for 0.5~2 seconds. Switching from automatic to manual mode keeps 100% brightness at night, but automatically turns off at dawn. Read more Multiple occasions: Read more Read more 2 Pack Dusk to Dawn Outdoor Wall Lantern Motion Sensor Outdoor Wall Light with Outlet DIMENSIONS 5.63"L x 6.88"W x 11.02"H 5.9"L x 8.55"W x 10.55"H BACK PLATE 4.37"L x 6.65"H 4.84"L x 5.78"H Sensor Dusk to Dawn Sensor Motion & Dusk to Dawn Sensor Waterproof ? ? Anti-rust ? ? Anti-corrosion ? ?

ORG2137388

10.6 inches

7.6 inches

4.3 pounds

12.8 inches

Appears New

544 S. Walnut Street, Wilmington OH 45177