STOCK IMAGE
Auction Ended
POLESTAR 12V DC 3500 lbs. RV Electric Power A-Frame Tongue Jack for Travel Trailer Camper with Drop Leg and Waterproof Cover
Sold
Brand New
QTY 1
$41.00
MSRP
MSRP is a sample online retail price.
$145.99
Last Update:
10/27/2024, 11:29 PM ESTItem Information
MSRP:
MSRP is a sample online retail price.
$145.99
Brand:
POLESTAR
Condition:
Brand New
Description:
This electric trailer tongue jack is a 12V motor-driven jack that makes coupling and uncoupling from the hitch on travel trailers and boat trailers an easier operation. New industrial design cover is extremely waterproof. Improved LEDs shine down onto your ball and coupler where light is needed the most. JACK USE AND CARE Do not modify the jack in any way. Always check for damaged or worn out parts before using the jack. Do not force the trailer jack. Never attempt to adjust the drop leg when there is any load on the jack. Components of Kit and Tools Required Three Grade 5, 1in. Long, 3/8in.-16 UNC Bolts and Lock nuts (included)Three 3/8in. Flat Washers (included)7/16 in. Wrench (owner supplied, not included)Torque Wrench (owner supplied, not included)Wire Cutters (owner supplied, not included)Wire Strippers (owner supplied, not included)Crimpers or Soldering Iron (owner supplied, not included) Read more HARD-WIRE CONNECTION Connect the BLACK wire lead from the jack directly to the positive (+) terminal of the battery or junction box. This unit has a built-in circuit breaker which automatically trips and resets if the amperage is too high. Now connect the WHITE ground wire to the negative (-) battery terminal or to the trailer frame. MAINTENANCE The Electric A-frame jack motor is sealed and maintenance-free. It is important to maintain the electrical system including the battery and charger (not included). Ensure all connections are tight and free of corrosion and that the jack is properly grounded . Make sure the battery is fully charged prior to use. MANUAL OPERATION INSTRUCTIONS If for any reason electric power is lost, disconnect the jack from the power source. Remove the rubber access cover on the top of the jack. Insert the manual crank handle into the access hole on the top of the jack, engaging the drive bolt. Rotate the manual crank handle counter-clockwise to extend the jack, and clockwise to retract it. Read more TECHNICAL SPECIFICATIONS Model no. 10201036 Maximum Lift Capacity 3,500 lb. Travel Full 22-1/2” stroke (18” power plus 4-1/2” manual drop leg extension) Height Range 9" to 31-1/2" Type 12V DC A-Frame Outer Tube Diameter 2-1/4” Foot Pad Removable 4-1/2 in. Drop Leg
Model:
10201036
Lot Code:
ORG3478366
Width:
10.4 inches
Depth:
6.7 inches
Weight:
24.0 pounds
Length:
35.1 inches
Additional Info:
Brand New
Pickup Location:
11670 State Route 41, West Union OH 45693
Auction Number
STR2200202
