AUTOSAVER88

Open Box

LET THE LIGHT GUIDE YOUR WAY AND HOLD EVERY MEMORY. Driving in the nighttime is a pretty tricky experience, especially if you have your tail lights broken or not working properly. The consequences of such traveling can be more than sad for both a driver and their passengers. To avoid any possible accidents caused by non-functioning tail lights, do replace them once the time comes. Upgrade your vehicle with a new, highly efficient set of AUTOSAVER88 lights and feel more confident than ever by informing other drivers whether you're about to turn or stop. And when the night comes calling, you will be ready to start your way. SPECIFICATION AND FITMENT. Specification: Quantity Sold: Set of 2 Light Source: LED lights (backup lights use stock bulbs) Street Approve: DOT/SEA approved Surface Finish: Black housing w/ smoke lens Location: Mounts using factory mounting locations Product Fit: CAD designed to provide a perfect, factory type fit Weather Sealed: Completely weather sealed to keep the elements out Replaces Original (OE) Part : 22837923, 22837924, GM2800196, GM2801196 Fitment: For 2007-2014 Chevy Suburban For 2007-2014 Chevy Tahoe Package Include: 1 Pair Tail Lights (Left & Right Side) LED Taillights for Chevy Suburban 2007-2014, Chevy Tahoe 2007-2014 -Black Smoke LED Taillights for Chevy Suburban 2007-2014, Chevy Tahoe 2007-2014 -Black Clear Lens Color Smoke Clear Housing ABS ABS Bulb Type LED LED Bulb Include NO NO Bulb Model Backup Bulb-3057 Backup Bulb-3057 Accessories Include Two Resistors Two Resistors STEP-BY-STEP INSTALLATION. Things you'll need: 1. Trim panel removal tool, socket wrench, or screwdriver (depending on the fasteners used in the assembly) 2. Tail light assembly that matches your vehicle's specs Installation: Step 1. Remove the old tail light. First thing you have to do is undo the mounting screws on the outside, if there’s any. You’ll have to open the trunk or any rear door or opening on the vehicle to access the back of the tail light. The wiring harness must be disengaged from the assembly through its back. Once the wiring harness is out, you can now undo the mounting screws or nuts, whatever fastener is used. With no more screws or nuts holding it in place, you can push out the assembly from behind. Step 2. Check if the tail light assembly you just removed is the same as the new one. See if they have the same components, design, and fasteners to ensure proper fitting. Step 3. Fix the new assembly into the tail light pocket. Once it’s fitted into place, secure it with the screws or nuts. Tighten them properly. You can now plug in the wiring harness that you removed earlier. Step 4. Test the new assembly. Switch on the tail lights to see if they work. If not, then some adjustments should be done to the newly installed tail light kit. Step 5. Put back any cover, trim, or component that was removed to access the tail light assembly. WHAT ARE TAIL LIGHTS? Location of Tail Lights Tail lights are on the rear end of the vehicle, facing rearward, which have reflective material inside of them to help amplify the light, allowing them to appear brighter. Safety Aspect of Tail Lights Tail lights provide a safety aspect of the vehicle. They show the rear edge of the vehicle to allow other drivers to appropriately gauge the size and shape of the car. How Tail Lights Work Tail lights work on a relay, which means they turn on when the head lights are turned on. This way, the driver does not have to worry about turning on the tail lights.

ATTL0210

BLU3710080

17.2 inches

11.8 inches

9.3 pounds

20.4 inches

Open Box

1260 Ohio Pike, Amelia OH 45102

ROW 5 & A 14