Brunoplast

Brand New

Bag = 250 pcs. of T spacers 2.0 mm / 0.08 inch for tile thickness 0 - 20 mm / 0 - 0.80 inch Spacer thickness: 2.0 mm / 0.08 inch, fits to our tile leveling system T-joint spacer for joint width 2.0 mm / 0.08 inch for laying tiles in offset pattern This tile levelling system is the one and only innovative tile levelling system for easy and reilable tiling, no matter if ised on floors or walls. Very easy to use, offers good value for money and ensures lippage-free tile laying! The system is particularly suitable for laying large format tiles. It saves you time, helps to achieve perfect joints and generates a lippage-free floor! Using our system you will lay tiles quicker, easier and more reliable with a perfect, yet unknown joint pattern. Usage of this system is that easy: - Push the spacer with it’s base under the tile. - Put on the black or grey draw caps and turn it clockwise to level the tiles and tighten the cap. - After the glue is hardened, remove the drawcap by turning it anti- clockwise and break-off the stem. - The thin plastic base will will remain under the tiles in the glue. Key advantages of our system: - very cost- effective, patented system! - perfectly straight / flat and lippage-free laying of tiles possible for everybody! - the perfectly straight floor massively reduces oncost for installing plinth tiles, skirting boards etc. - can be used with different materials like tiles, porcelain stoneware, natural stone etc. - especially suitable for large format tiles and calibrated tiles - absolutely straight / flat and laying of tiles wihtout any lippage - flexible in application thanks to 3 types of spacers (straight, T-shape and X-shape)

BPT 2.0

WEBB090420

0.8 inches

2.5 inches

8.1 pounds

12.5 inches

Brand New

1825 Webster Street, Dayton OH 45414

PAST PICK UP