Pyle

Appears New

Size:10x8x4 inches Pyle PTA4 Home Amplifier is perfect for powering any stereo system. Complete with AUX/CD inputs, and 2 x 120 watts of power -- this simple to use and durable amp has bass and treble controls, a slick blue LED output level display, L/R RCA inputs, and 4 speaker outputs. Using sophisticated circuitry and premium components for uncompromising musicality -- this product is famous for delivering powerful and accurate sound. This small but powerful amp delivers clear and crisp audio for it listener. Durable and affordable, this amp is made to last. From the Manufacturer Front View Click here for a larger image Connection Diagram Click here for a larger image Back View Click here for a larger image Stereo Power Amplifier Click here for a larger image The Ultimate Stereo Power Amplifier This amplifier gives you the power and versatility you need to create a professional sound system. Its wide frequency response makes it suitable for amplifying any type of audio including music or vocals. It can be used in meeting halls, restaurants, schools, stores and, at home --the perfect solution for paging systems anywhere. Get the power you need with 2 x 120 Watt to handle all your audio needs. Switchable Mixing (Karaoke) Mode When set to 'mixing' the signals from AUX1, AUX2, CD, & MIC will exist at the same time and works great for creating a karaoke event. Your music will play from your selected audio source and you will be able to sing through a connected microphone. (Microphone not included) Switchable MIC Pager Mode When set to 'pager' the signal from AUX1, AUX2, & CD will be attenuated by -12 dB and the signal from MIC will override to page (Auto Talkover) and makes for an exceptional paging system. Push Type Speaker Terminals Lets you easily connect speaker wires directly to the amplifier. The speaker impedance can be ranged from four to eight Ohms for the general stereo output. The total speaker impedance must be at least four Ohms per channel at stereo mode. 110/220 Voltage Selector This amplifier has selectable input voltage from 110 V/60 Hz (the standard in USA and Canada) to 220 V/50 Hz (for European operation). Please make sure the switch is in the proper position before operating. .14-Inch AUX-In Jack The .14-inch jack, located conveniently in the front, allows you to connect the input of many devices including iPods, MP3 players, smartphones, CD players, etc. .25-Inch Phone Jack Accepts headphones with .25-inch plugs. .25-Inch Microphone Input Jack Accepts microphones with .25-inch plugs. REC RCA Output Lets you connect the amplifier to a tape deck for recording. Take Control Use the control center panel located on the face of the unit to make adjustments to microphone volume, master volume, balance, bass, and treble Replaceable Power Fuse The amplifier uses a fuse for protection against surges and short circuit. If the amplifier suddenly turns off and will not turn on, check the fuse, and replace it if necessary. (Replacement fuse to use: 1.5-amp, 250-volt, fast-acting .2 x .8 inches fuse -not included) Additional Features Harmonic Distortion: 0.3% 2 x 120 Watt RMS at four Ohms Blue LED Output Level Display Frequency Response: 20 Hz-40 kHz Power Fuse: 1.5 A, 250 V Fast-Acting (.2 x .8 inches) Power Requirement: 120 V AC 60 Hz/230 V AC 50 Hz Tone Controls: Bass & Treble: +/-12 dB (100 Hz/10 kHz) Dimensions: 8.27 x 2.72 x 5.39 inches

PTA4

YEL4725815

8.1 inches

4.5 inches

5.5 pounds

9.8 inches

Appears New

333 West Seymour Ave., Cincinnati OH 45216

3