Image 0
STOCK IMAGE

Auction Ended

https://m.media-amazon.com/images/I/61B3a8IO4dL.jpg
https://m.media-amazon.com/images/I/71WvdJfv2vL.jpg
https://s3.amazonaws.com/lotting-images-prod/phillipi/ORG5115035_1695923149077.jpeg
https://m.media-amazon.com/images/I/71q6McgDtcL.jpg
https://m.media-amazon.com/images/I/71a9vS9-3TL.jpg

AUTOINS Scissor Jack Set- 3 Ton (6614 lbs) Car Jack Kit Auto - Smart Mechanism with Hand Crank/Wrench/Lug Wrench Thickened Base for Car SUV MPV

Sold
Appears New
QTY 1
$13.25
MSRP

MSRP is a sample online retail price.

$60.99

Last Update:

12/23/2024, 1:08 PM EST

Item Information

MSRP:

MSRP is a sample online retail price.

$60.99
Brand:
AUTOINS
Condition:
Appears New
Description:
Read more Hexagonal connector Smart Mechanism with solid Ratchet Hexagonal fitting of jack: S=17mm Ratchet wrench: S=17mm; L=338mm. Hexagonal joints are suitable for many tools. It can be operated by not only manual ratchet spanner but also electric wrench. The handle receiver adopts the mature technology of hot forging Lightly press the button to switch on and off the jack quickly. With this scissor jack you can easily and safely lift your vehicle to the desired height. 360 Degree alignment Rotation Head Head / Saddle dimensions: length : 5cm /1.97inch ; width : 3.8cm / 1.5inch. Its a pretty good size for SUVs and smaller cars. such as: sedan, coupe, MPV, hatchback, crossover, wagon and more.Its low enough at 4 inches to get under smaller cars and high enough at 17 inches to pick up SUVs without the need to use other jacks and jack points at the same time. Thickened and Wider Stable Bow-tie Base Autoins updated thickener base provides stability and strength in case of dumping.. Occasionally lubricated the spindle to make lifting more easier. Make sure that the saddle is correctly positioned. Read more How to use ? STEPS: A.Before lifting, stop the vehicle on the level and hard road (the maximum slope shall not be greater than 6°) B.Put the manual gear into the first gear or reverse gear, and put the automatic gear into the "P" gear, and pull on the parking brake of the hand brake. C.Block the wheel which is on the diagonal of the broken tire with a big stone. D.Loosen the wheel nuts, but do not unscrew. E.Place the jack under the jacking position specified by the automobile factory, and use the ratcheting handle to lift your car to a proper height. F.Pull off the wheel nuts and replace the broken tire. G.Pull on all the fixing nuts of the new wheel by hand. Lower the jack until the tire is on the ground. Then take out the jack and use the wheel wrench to tighten all the wheel nuts. SAFETY GUIDELINES ·Never change a flat tires on the hard shoulder of a motorway. Breakdown patrols are trained to do it safely and their hazard lights are more visible. Ensure you and your passengers get out of the vehicle and wait in a safe area away from the vehicle and preferably behind a safety barrier. ·Never allow people to stay in the vehicle or get into a vehicle when raising the vehicle. ·Never exceed the rated load capacity. ·Never go underneath a vehicle which is being raised. ·Never lean against the raised vehicle. ·Never lift more than one wheel at a time. ·Never put an additional saddle or support on top of the scissor jack. ·Always rest the base of the scissor jack on a firm and level surface which is able to take the load. Do not position the scissor jack on metal gratings or manhole covers. ·Always seek professional advice before using the scissor jack on a caravan, light Trailer or a three wheeled vehicle. ·Always apply the hand brake and put the vehicle in "First" gear if it is a manual gearbox or "Park" if it is an automatic vehicle, with the engine switched off before using the scissor jack. Do not switch on the engine whilst the vehicle is raised off the ground. AUTOINS Scissor Jack Kit Effortless High performance and durable 1.Portable Emergency Tire Jack Kit with Wheel Wrench. A ratchet wrench that allows you to use the Jack more efficiently. In addition a breaker bar and the sockets can be used both ways as each side has a different socket size. 2.This light car lifter is really handy and it is very easy to store in your trunk. 3.Black electrophoretic paint, not easy to rust. Product Specifications: Maximum load capacity: 3.0T (3000kg/6,614 lbs) Minimum lifting height: approx. 105 mm/4.1" Maximum lifting height: approx. 440 mm/17.3" Jack dimensions: 480 x96 x 98 mm(18.9x3.8x3.8" ) Jack weight net: 3.3 kg/ 7.3lbs Telescoping Wrench length Range : 360-500mm 2 x Drive Head Size : 17/19mm and 21/23mm Package Included : 1 x Scissor Jack 3.0 Ton 1 x Telescoping Lug Wrench 1 x Ratchet Wrench 2 x CR-V Sockets 1 x Carry Bag 1 x Gloves Read more
Model:
DI9-EKL02
Lot Code:
ORG5115035
Width:
4.5 inches
Depth:
3.9 inches
Weight:
9.5 pounds
Length:
19.3 inches
Additional Info:
Appears New
Pickup Location:
967 Goodale Blvd, Columbus OH 43212
Auction Number
GDB2300573

Related Auctions

From ($)To ($)Increment ($)