Sdstone

Open Box

Numeric keyboard & LED Display Screen There is a LED display screen equipped with low battery light, warning light and confirm light?providing more intuitive tips for you during the operation. When the batteries are almost exhausted, the low battery light would light up. When you input the incorrect code, the warning light would light up. When you input the correct code or finish your reset successfully, the confirm light would light up. External Power Supply Here is an external power supply specially prepared for you. If your internal batteries have been dead and you lost the key too, you can connect the power to the safe from the outside by the external battery connection hole. Then you can input the code to unlock your safe. Wall & Floor Mounting 1 Drill holes in the right place for installing expansion bolts. 2 Turn the expansion bolts in the right place. 3 Turn the expansion bolts counter clockwise to separate. Use expansion bolts to secure your safe to the wall or floor. You can hide your safe in the cabinet too. Read more LATEST INDUCTION LIGHT DESIGN The safe is equipped with an internal indicator light. When you open the safe, the indicator light will light up automatically. Read more Read more 2 Ways to Open Manual key + Knob or User password/master password + Knob When you open the safe for the first time: You can only open the door by the emergency key for the first time. Firstly, remove the emergency lock cover. Secondly, insert the emergency key and turn the key counterclockwise. Then, turn the lock cylinder clockwise to unlock the safe. When you open your safe after the first time: Input your code (3-8 digits) on the keypad and don’t forget to press the button to confirm. Then turn the knob clockwise to open the door. Package Includes: 1 × Cabinet safe 1 × User manual 1 × External power supply 2 × Emergency keys 2 × Expansion bolts 4 × 1.5V AA Alkaline batteries Read more Easy to Reset Your User & Master Codes User code: Press the reset button which is behind the door. And you will hear 2 beeps. Now you can input your own user code (3-8 digits) on the keypad. Then press the button to confirm. If the confirm light turns on, the reset is accepted. If the warning light flashes, the reset is not accepted and you need to try again. ?Note?The preset user code is 159.? Master code: If you forget your user code, you can set the master code in following steps: 1. With the door open, press 0,0 then press the reset button. 2. Input the new code (3-8 digits) and press to confirm. If the confirm light flashes, your master code is accepted. Read more Read more

YK-18EI3220-B1

GRN5056269

9.8 inches

7.7 inches

10.1 pounds

13.6 inches

Open Box

109 Triport Road, Georgetown KY 40324