POWERTEC

Appears New

Introducing the Tablesaw Crosscut Sled Kit by POWERTEC. This cross cut jig was designed to produce perfectly repeatable and highly accurate cross cuts when using a full-size contractor grade table saw. No matter the type of cut, this tablesaw sled kit performs efficiently and effectively. Large pieces can now be handled much easier and with greater accuracy. The sled comes complete with stops and clamps used to hold the work, safely keeping hands away from the blade. This also gives you more control with less chance of kickbacks. The sled table is cut to fit the individual saw and blade – acting like a zero clearance insert. Sled Features Adjustable 90 degree stop. Easy to read graduations for mistake free set-ups and measurements. Hold down clamps will not deform or bow the table if the clamp bolt is clamped straight. Low friction tape that prevents wear, protects the table and provides seamless transitions and sliding for the platform and/or fence. A high quality flip stop designed to prevent the accumulation of chips and debris without extending the entire width of the fence surface. Package Contains Base (table) 23-13/16” x 23-13/16” x .488” (12.4 mm) MDF with both sides melamine coated Fence face – 24-3/8” x 2-9/16” x .488” MDF with both sides melamine coated Fence – Heavy Extruded aluminum 24”x 3-3/8” x 2-7/8” Miter bar – aluminum 24” x3/4”x 3/8” with 8 holes for adjustment screws Comes complete with necessary knobs, t-bolts, allen key, screws, screwdriver, wear resistant strips, and adjustment hardware Instructions

71403

RED5490867

24.8 inches

3.5 inches

16.0 pounds

25.2 inches

Appears New

7660 School Road, Cincinnati OH 45249