KUNTEC

Open Box

KUNTEC 19PCS Universal Front Wheel Drive Bearing Puller Master Set Hub Removal Installation Tool Kit Comprehensive set for the removal and installation of front hub bearings To quickly replace wheel bearings Suitable for most front wheel drive cars, vans and light trucks Package include: 1 x Steel Drifts : 38mm 2 x Drift : 86mm, 91mm 1 x Receiver Sleeve : 76mm 9 x Adapter Drift: 55.5mm, 59mm, 62mm, 65mm, 66mm, 71.5mm, 73mm, 78mm, 84mm 6 x Hub Screw : M12 x 1.5 mm(3pcs)+ M14 x 1.5 mm(3Pcs) Read more Operation Step.1 Determine if the vehicle has a trapped rotor or a floating rotor. Step.2 Assemble the tool components, and press out the worn bearing. Step.3 Lightly lubricate the new bearing, and position it for installation with the tool components assembled. Press the bearing into the spindle assembly until it bottoms. Step.4 Fasten the bearing retainer in place using the bearing retainer bolts. (On Neon vehicles, install the snap ring in the knuckle.) Step.5 Assemble tool components. Lightly oil the hub assembly, and install the hub. Attention?: The bearing installer must be assembled with the flat side toward the bearing and the small diameter pilot on the side away from the bearing. Step.6 Assemble the remaining vehicle components that were removed for bearing replacement: (1)lower ball joint to steering knuckle assembly brake rotor. (2)disc brake caliper. (3)outer tie rod nut and tie rod. (4)axle nut. (5)front tires. Read more Made of Heavy-duty carbon steel with black anodic oxidation coating for ultimate rust-resistant performance These front wheel bearing adapters replace wheel bearings while keeping the steering knuckle and strut assembly in tact on the vehicle, eliminating the need for front end alignment once the work is done Easily remove and install wheel bearings on front-wheel drive vehicles. Greatly reduces the damage done to the hub and bearings Read more

KC0030

EXS00766061

11.1 inches

3.4 inches

18.1 pounds

13.7 inches

Open Box

590 N. Germantown Pkwy, Cordova TN 38018