rabbitgoo

Appears New

Brighten your home with Rabbitgoo Decorative Window Film – Partial privacy protection blurs unwanted views, simple frosting texture decorates your personal space, static cling to the surface without glue, simple peel-and-stick installation, easy to cut and trim, easy to remove and re-apply for multiple times. Key Features: Partial Privacy Protection: it's nice to feel safe at your own placeUser-Friendly: Hassle free peel-stick application in a breeze, easy removal leaving no damage or residueGlue Free: Simply use soapy water to install, no toxic glue requiredUnique Patterns: Decorate your home windows with regular elegant patternsRemovable & Reusable: Premium PVC material offers extra durability, can be re-positioned and reused repeatedlyUV Protection: Say goodbye to 84% UVA rays and 99% UVB rays that may hurt your skin and cause furniture fading Package Included: 1 x Rabbitgoo Decorative Window Film Roll (17.5" x 78.7", 44.5 x 200 cm) Installation Instructions: 1. Measure the surface and cut the film. Leave an extra inch margin each side for an easy adjustment.2. Clean the target surface thoroughly and make sure the surface is clean enough without any dust.3. Peel off the transparent backing film from the window film. (Very Important!!!)4. Spray a lot of water or soapy water both on the SMOOTH side of the window film and the window, then install the window film onto the window.5. Use the soft towel or squeegee to wipe the film back and forth to make sure that the bubbles and water have been totally removed.6. Trim off the margins, use a cloth to flatten out the film. Here you go! How to Find and Peel Off the Clear Backing Film: Step 1 - Please wet one window film corner and use your fingers to twist it for a while to loosen the attachment between the window film and clear backing film;Step 2 - Please attach a sticky tape to the side of the clear backing film corner (we have also attached a small sticky tape on each roll of window film for your convenience), and then press it for effective attachment;Step 3 - And then you are able to separate the clear backing film from the window film easily. Note: Detailed installation instruction is also printed on the inside of the Rabbitgoo box.The window film works only on FLAT, CLEAN, and SMOOTH surfaces. It will not stick on plastic, broken or uneven surfaces. Easily Removed&Totally Reusable It can be easily removed without any glue residue left, and you can re-position and re-apply it for multiply times. Enjoy More Softened Natural Light In Summer This window privacy film will diffuse direct sunlight to prevents glares to give you comfortable sunshine at your personal space. Protect Your Privacy Anywhere You Want You can apply this frosted window film to your home, bedroom, office, living room, kitchen and so on. Read more User Instructions: Clean the Surface and Get the Needed Film 1. Clean the target surface thoroughly. Make sure there is no oil, dust, or stain left. 2. Measure and trim the film to the required size. Please trim it carefully with your sharp knife cutter for it would tear if you use too much force. User Instructions: Ready to Apply 1. Tear off the backing film. Please affix tapes on both sides of the window film to separate. Or you could wet the window film corner and rub it for a while, then you will see the thin backing. 2. Clean and spray the surface evenly with enough water. User Instructions: Apply it and Wipe Bubbles 1. Apply the film onto window glass. 2. Use the soft towel or squeegee to wipe the film back and forth to make sure that the bubbles and water have been totally removed. User Instructions: Cut off the Margins and Clean the Film 1. Trim off the margins. 2. Use a cloth to flatten out the window film. Teamwork will be more helpful!

A089-44.5-MX

YEL5233453

1.4 inches

17.6 inches

8.8 ounces

1.5 inches

Appears New

96 Meadow Run Road, Wellston OH 45692