Palmgren

Good Condition

The Palmgren ½ ton Arbor Press Delivers the heavy force needed for riveting, squeezing, punching, bending, and other pressing applications. Removable machined steel anvil provides accurate work support in four slot positions. Depth stop securely clamps to the ram and withstands full pressure. A lockable fine adjustment adjusting screw accurately limits the depth of the ram stroke. The rugged steel ram is driven by a machined piston and dimensions are ¾ x ¾ inches. Punches or tools may be added to the end of the ram with the aid of a magnetic insert. The ram is reversible with one end solid and the other end with a hole and magnet to hold bits and tools. Sturdy cast-iron construction allows for the rugged strength needed for tougher jobs. The base is pre-drilled for mounting on either a bench or pedestal, and it is also machined to hold the included three bit set. The bit set includes one pointed bit, one round bit, and one square end bit along with a removable steel anvil. The removable anvil has a diameter of 3 ½ inches. From the Manufacturer 4' Palmgren cradle style angle vise is the quickest way to set your work between 0? and 90?. Jaw Width: 4' Jaw Depth: 1-1/2' Jaw Opening: 4' Base Size: 7-3/8' x 7-9/16'Made from FC25, fine grain cast iron; Trapezoidal- thread lead screwLess than 0.002' jaw deflection at 2,000 lbs. clamping pressure; Jaw surfaces square to 0.002'Solid iron construction with stress- relieved design; Replaceable jaw platesPin stops every 15? for quick angle set-ups. Heavy steel cam locking mechanism for securing vise at any angle; Scale indexed in 1? increments from 0? to 90?Fixed jaw is grooved horizontally and vertically for holding round stock

9661051

ORG5894511

12.1 inches

9.3 inches

18.9 pounds

12.3 inches

Good Condition

109 Triport Road, Georgetown KY 40324