Geeyae

Good Condition

FEATURES:4FT long shaft for easy use and long reach.With an impressive vibration frequency of over 13,000 vibrations per minute, it removes air bubbles and helps concrete settle faster.Adopt of imported mute bearings, compact design, light weight. Low noise, high efficiency, smooth operation, fast heat dissipation, low temperature rise.High temperature resistant pure copper enameled wire, full copper winding, durable and stable.Easy to operate, the electric concrete vibrator is essential to construction use, ensuring the fastness of buildings. HOW TO USE:Maintenance and inspectionBefore any work on the machine itself, pull the mains plug.The brushes should be checked periodically and warm-out brushes should be replace in time,after replacing,inspect,whether the new brushescan move freely in the brush holder,keep running the motor for 15 minutes to match the contact of brushes and commentators.Keep the ventilation slots clear from dirt , clean off the accumulated dust and oil dirt periodically.During normal operation , if anything happens ,the power supply should be cut off at once and the tool should be checked and repaired.Regular inspect all mounting screws and ensure that they are properly tightened, should any of the screws be loosen,Tighten them immediately,failure to do so could result in personal injury.Do not expose the tool to rain. SPECIFICATION:Voltage: 110V 50/60HzRated current: 2.8ADiameter: 1-3/8 inches/35mmShaft Length: 4 feet/1.2m PACKAGE LIST:1 × 800W Concrete Vibrator1 × 1.2m Hose NOTE:Do not use power tools in damp or wet location ,keep work area well lit do not use power tools where there is risk to cause fire or explosion.

SP-0049

GRN5737648

12.8 inches

4.1 inches

12.1 pounds

27.8 inches

Good Condition

1170 Industrial Park Drive, Vandalia OH 45377

15