STOCK IMAGE
Auction Ended
Garage Door Torsion Springs Set(.250x2x30"), Pair of 2" ID Electrophoresis Coated Heavy Duty Torsion Spring Replacement for Garage Doors, with 2pcs Non-Slip Winding Bars,Minimum 16000 Cycles
Sold
Brand New
QTY 1
$4.20
MSRP
MSRP is a sample online retail price.
$110.00
Last Update:
02/15/2025, 11:11 AM ESTItem Information
MSRP:
MSRP is a sample online retail price.
$110.00
Brand:
Lamudo
Condition:
Brand New
Description:
These standard residential garage door torsion springs are manufactured from heat treated professional spring steel coils, with Precision Electrophoresis Black Coated, passed a up to 300 hour salt spray test, which can service you at least 16000 times, won't lose elasticity for at least 3 years.How to choose correct garage door torsion springs?When you want to replace the broken Garage door spring, just to place an order according to the size of the original spring. Usually, you can find the spring size on the spring or on the commodity label. If you cannot determine the size, you can measure the length, wire diameter, and inner diameter of the spring to determine the torsion spring size. Or, if you need to install a new spring and are not sure what spring to use, you can determine the spring size by measuring the weight of the Garage door.Replace single or both torsion springs?When one of the two springs on the Garage door is broken, you should replace both torsion springs, because springs have same cycle life rating, when one spring breaks, the other will probably break before too much long. Replace two springs will be safe to use, and save the trouble of replacing the spring again.Why use two torsion springs?Some people have a garage door with only one spring on it, and wonder whether they should upgrade to two springs. If the torsion spring on your door has an inside diameter of 1-3/4" and a wire size of .250 or larger, you should consider upgrading to two torsion springs.The problem with a single-spring door is that after prolonged used, the cables, drums and steel sections may breaking or getting damaged, this can cause serious problems in the future. But these problems can be avoided by using two springs. When one of the two torsion springs is broken, the other one can share the weight of the garage door without causing significant damage.About installationAlthough it's easy to install the torsion springs, but we do not recommended you install torsion springs yourself unless you have the proper tools, reasonable mechanical aptitude, experience and arm strength. Torsion springs and attached hardware are under extreme tension at all times and can cause serious injury. Please seek professional guidance, or find a installation video on the Internet.When you wind the torsion springs on torsion shaft, we recommended that 7' high door 28 1/4 turns, 7'6" high door 30 1/4 turns, 8' high door = 32 1/4 turns, and then make some adjustments according to your situation.Please notes: one out of the 4 holes on the wending cone is different from others, Convenient for determining the number of turns of winding.Materials required for torsion spring installation:A Vice grips, 1 3/8” Wrenches, 2 9/16” Wrenches, Tape Measure, Pair of Winding Bar(included), Step Ladder,Gloves(included). GENERAL SAFETY GUIDELINES: Before you start please disconnect opener first. Do not over tighten the set screws on cones and dumps, this could damage the cones or torsion shaft.ALWAYS wear work gloves and safety glasses duringinstalla tion.DO NOT hang tools or materials from horizontal tracks.
Lot Code:
GRN5846783
Width:
6.0 inches
Depth:
4.0 inches
Weight:
27.1 pounds
Length:
33.5 inches
Additional Info:
Brand New
Pickup Location:
12209 Chandler Drive, Walton KY 41094
Auction Number
CHA2400163
