Super Stars

Open Box

Radiator Pressure Tester Check for leakage in radiator system1. Refer to the vehicle’s service manual for specific radiator pressure testing instruction.2. After the vehicle’s cooling system has cooled, loosen the vehicle’s radiator cap slowly to relieve any excess pressure before removing the cap completely. Never open the cooling system while it is hot. Serious injury could result. 3. Select the proper adapter and configuration of the stationary seat accessories. Securely attach the adapter to the filler neck of the radiator or expansion tank.4. Attach the quick connector of the hand pump onto the adapter.5. Rapidly pump the hand pump handle while watching the pressure gauge. Pressurize the radiator up to the optimal pressure only - DO NOT OVER PRESSURIZE THE RADIATOR. Ideal readings should range between 15-20PSI (1.03-1.37BAR). a) Gauge holds steady – If gauge hand holds at the same pressure number for 2 minutes, there are no serious leaks in the system.b) Gauge drops slowly – Indicates the presence of the small leaks or seepage.c) Gauge drops quickly – Indicates serious leakage is present.6. Once the test is complete, release the air pressure by pressing the pressure release valve on the hand pump. Then disconnect the quick coupler and adapter assembly.Refill Cooling System1. Connect the coolant hose to the coolant hose quick coupler and submerge in coolant.2. Assure that valve is in the closed position and that there is coolant in the coolant hose.3. Turn valve to the open position to allow the coolant to refill the cooling system.4. The refill is complete when the gauge reads 0.Note: Please check the coolant level and add coolant as necessary to the proper level.

ORG5188516

16.7 inches

4.2 inches

10.9 pounds

21.0 inches

Open Box

2809 Howard Litzler Drive, Latonia KY 41015