Mxmoonant

Good Condition

Why Do You Need An Ultrasonic Mist Maker? It can help the pond/landscape pool to increase the magical atmosphere; It can help enhance the festive atmosphere of Halloween/Christmas, etc.; It can help maintain proper humidity and take care of small plants; ...... The 10 Head Ultrasonic Fog Machine use the electric oscillation of the ultrasonic frequency to throw water off the water surface to form a natural and elegant water mist. Compared with dry ice making fog, the mist produced by the MIST MAKER FOGGER is better. Comprehensive Pack Each type of mist maker will create the best effect within the following range, please check: 6-head 5? indoors 2? outdoors 10-head 8? indoors 5? outdoors 12-head 9? indoors 6? outdoors Package Includes: 10-head mist maker1400W Power supply1Buoy1 Mist Spray: Input voltage: DC 48VMax.Spray volume: 7000ml/hUsing water temperature: 5?~45? (the normal tempertue is around 20-25?)Please put the mist maker alone no more than 9CM depth in the water (We provide a buoy in the package which is helpful if the water is deep) Parameter Power supply: Input voltage: 110V/50-60Hz, US Plug Output voltage: DC 48V Rated power: 400W (This is one of the most updated powerful power supplies in market ) Water&Mist Proof: IP67 Noise: 36dB below Please kindly understand the mist maker needs to be connected with the power supply while working. Read more The updated power supply is IP67 waterproof, it can be exposed to water for short time, and working in a misty environment, but do not put it in the water out of saferty! This is updated for better and more safely coping with the wet environment, but not for working in the water. Besides, this one needs no extra wiring, you can use it out of the box. Wide Range of Application High-precision Sensors 3rd Updated Version High-precision capacitive induction water level sensor, built-in temperature control protector of working temperature 5°C- 45°C, more accurate high sensitivity ensures longer service life. When the water is no enough or the temperature is high, the machine stops working to ensure safe use. Discs Replacement & Maintanence This fogger uses ceramics discs, rubber-wraped, non-wire-bonding type, frequency 1.7MHz, easy to replace. NOTE: If the mist amount is significantly reduced, use a cotton swab to clean the discs (without cleaning agent) . If it does not help, please replace with the new. Un-tightly screwed, broken or deteriorating discs will result in water in-leakage. Waterproof Power Supply Installation 400W excellent power supply of IP67, it is able to work in a wet condition but CANNOT be directly put into the water while working, which will cause short circuit! Recommended working time 6-8 hours per day with an interval of a few minutes, do not exceed 10 hours per day. Get One Intended for Ponds A buoy is included in the this pack. The best water level for the fogger to make large mist is about 7cm. If the water is too shallow or to deep, only will the indicator flashes and there is no fog. If you are going to use it in pond, a buoy would be necessary to keep it working at the best water level. Read more SIMPLE USE AND SAFE USE - Best Efficiency Makes Out of Simple Tips NOTE: The machine is safe and simple to use, but there are some safety issues associated with using the machine irregularly or excessively. To use the machine more effectively and safely, please try the following tips as much as possible, which are simple but will greatly ensure using safety and increase the life of the machine. Tip01: Please do not place the Transformer and other Cable Connecting Parts into the water! Tip02: The Mist Making Board works nicely in about 2.75inch/7cm water depth. When the water is deeper than 3.9inch/10cm, please use a buoy. Please pay attention to the model when choosing a buoy. It is best to use tap water without essential oil. Tip03: Please use the mist maker no exceed 10 hours at most a day, working overload will badly shorten th service life. Tip04: The degradation of the ceramic discs will cause water leaking-in, please clean the ceramic discs with cloth regularly (depending on the using frequency) and replace with the new discs in time. Tip05: When replace the ceramic discs, please make sure the cavity is dry, and tighten the ring to prevent accessories loose resulting in water leaking-in. Tip06: If you have problems with the products or have any question, please let us know. 10 Head Mist Maker Single Head Pong Fogger 3 Head LED Ultrasonic Mist Maker 12 Head Ultrasonic Mist Maker 6 Head Ultrasonic Pond Fogger Size 288.55.2cm ?1.8 inches/4.6cm, 2.38cm tall ?2.75 inches/7cm, 4.5cm tall 32.38.55.2cm 188.55.2cm Material Stainless steel Zinc alloy Plastic & LED lights Stainless steel Stainless steel Maximum Evaporation 7000ml/H 350ml/H 1500ml/H 8400ml/H 4200ml/H Proper Water Depth 7-9cm 5-7cm 6-9cm 7-9cm 7-9cm Voltage 110V US Plug 110-240V 100-240V 110V US Plug 110V US Plug

BLU5927671

11.5 inches

8.2 inches

10.7 pounds

12.5 inches

Good Condition

2224 Waycross Road, Cincinnati OH 45240