STOCK IMAGE
Auction Ended
WINSOON 6FT Rail Single Track Bypass Sliding Barn Door Hardware Kit for Double Doors, Low Ceiling, Easy Mount, Heavy Duty, Slide Quietly and Smoothly
Sold
Good Condition
QTY 1
$13.50
MSRP
MSRP is a sample online retail price.
$109.00
Last Update:
09/17/2024, 3:23 AM ESTItem Information
MSRP:
MSRP is a sample online retail price.
$109.00
Brand:
WINSOON
Condition:
Good Condition
Description:
6ft single rail bypass barn door hardware kit for double doors ( door not inlude ) Pre-purchase Information Doors are not included, only the hardware kit is for sale. You will need 5" clearance from the top of your door to the ceiling (or crown molding, if any) for this kit to fit correctly. Fit for door panel thickness: 1-3/8" to 1-3/4". This single rail bypass hardware kit can hold door weight 230lbs. The gap between door and wall is 5/8" and between door and door is 1-3/16" based on 1-1/2" thick door. Safety Assurance Measures Hnager: Upgraded Nylon wheels, each with 2 life time lubricated bearing ensure slide smoothly and quietly. Test beyond 120,000 rolls. You can use it for a long time! Door Stopper: Prevent your door from rolling off the rail, Anti-collision, the rubber caps ensure a quiet close. Anti-jump Pad: Prevent door be lifted off rail. Install them on the top of your door, the anti-jump pad and the roller can hold the rail once the door hit the stopper. L Floor Guide Two installation methods give you the option, allow you to not need to open a slot on the door bottom. The floor guide can prevent the doors from swing, allow you to open and close your door freely. Read more Packaging List 1 x 6FT Rail5 x Track Support2 x Straight Down Steel Hanger2 x Bending Steel Hanger2 x Door Stopper2 x Anti-jump Pad2 x Door Guide1 x Hex Wrench All other necessary hardware is included as you see in the pictures. ONLY the hardware is for sale, doors are NOT INCLUDED. Read more Q: How do I know the length of track I need for my opening? A: Usually track length should be equal to your total two doors width or opening. For example, if you have two doors that are each 48'' wide. You will need 2 x 48'' = 96'' long track. Or if you have a opening that is 60'' wide, you will need at least 60'' long track. Q: Can I cut the rail to fit my wall? A: Yes, the rail can be cut to any length. We recommend using an angle grinder to cut the rail. Q: What is the weight capacity? A: Your door limited 230lbs. Q: What is the compatible door thickness? A: 1-3/8" ~ 1-3/4". Note: If you have door thickness that falls out of this range, please let us know your exact door thickness so that we can put shorter hex bolts for your thinner doors or longer hex bolts and spacer extenders for your thicker doors. Q: What is the minimum clearance required above door? A: At least 5". Q: When do I need a headboard?? a. If the pre-drilled holes in the rail don't line up with your wall studs. b. If there is a doorway trim. Attach a header board with the same thickness as your doorway trim into your studs first, and then mount the rail onto the header board. Read more
Model:
GCM5164-N
Lot Code:
BLU6131988
Width:
19.6 inches
Depth:
3.2 inches
Weight:
6.2 pounds
Length:
74.2 inches
Additional Info:
Good Condition
Pickup Location:
967 Goodale Blvd, Columbus OH 43212
Auction Number
GDB2400453
