SIMAX3D

Brand New

?Product Characters: 2GT Belt is good quality,high cost performance,high cost performance make our core pursuit,excellent craftsmanship, more durable,high quality Neoprene Belt: Good oil resistance,heat resistance and aging resistance Constant speed ratio,no slip,high transmission efficiency,greatly improve work quality. ?Specification: Type:2GT GT2 Pitch:2mm Material:Rubber Length:5 meters Width:10mm Shape:Open timing belt ?Installation 1,Please tighten the center distance of the transmission device until the tension meter detects that the belt tension is appropriate. Turn the driving wheel several times by hand to re-measure the tension. 2,Tighten the motor's mounting bolts to correct the torque.Because any change in the center distance of the transmission during operation will cause poor belt performance, it is important to ensure that all transmission components are tightened 3,Start the device and observe the performance of the belt, check for abnormal vibration, listen for abnormal noise, it is best to turn off the machine, check the condition of the bearings and motors, or feel too hot to the touch, the belt may be too tight, or the bearings are asymmetric Or inaccurate lubrication 4,It is more convenient to use with the pressure plate. It is used for rubber open timing belt. The PU open timing belt interface is combined with the interface. The metal block is pressed against the gear bar. The belt is placed in the middle to fix the belt. It is used on the round-trip transmission. ?Tips 1. It is strictly forbidden to twist the synchronous belt during storage and transportation, otherwise the tensile layer will break. 2. The timing belt should be stored in a dry place away from direct sunlight. Packing: 5 Meters 10mm GT2 timing belt x1

GT2003

ORG4575322

5.4 inches

0.4 inches

0.1 pounds

7.8 inches

Brand New

1301 N Dixieland Road, Rogers AR 72756