Adviace

Good Condition

This blower is compatible with GHP Group, Monessen/Majestic (MHSC Brands), Majestic Dutchwest Windsor, CFM US Century Plate Steel Freestanding Wood Stove Fireplaces. Make your wood burning stove even more efficient with this blower. When you add a blower to your wood burning steel stove, heated air from the stove will be circulated better throughout your room. This blower will allow you to heat a bigger space while using less fuel, which will save you money. And a more efficient wood burning stove means that you will spend less time going outside in the cold for more firewood.Variable speed operation allows adjustable heat distribution. The blower is NOT thermostatically controlled, it is a manual variable speed switch. The blower speed is manually controlled by rotating the speed control knob until the desired speed is achieved. When turned on the first setting will be LOW. HIGH setting may be obtained by obtained by rotating the speed control knob clockwise.Installation: The blower is to be installed at the rear of the stove, on the rear heat shield. Align the blower and gasket mounting holes with those on the rear heat shield.IMPORTANT: Ensure the blower and gasket are oriented correctly. The blower wheel and gasket cut-ot must align with the cut-out in the rear heat shield. Fasten the blower and gasket to the rear heat shield using the four (4) screws provided. DO NOT over tighten screws. Be sure to plug the blower into a 3 prong gounded outlet. DO NOT tamper with the grounding prong on the cord.Cleaning: Periodic cleaning of the blower is recommended. Dust or dirt accumulation could significantly restrict airflow. Restriction in airflow will reduce the efficiency of the blower and possibly damage the motor.

EXS01206566

6.6 inches

4.8 inches

4.0 pounds

11.3 inches

Good Condition

620 W Fort Williams Street, Sylacauga AL 35150