Sondery

Good Condition

HOW TO MOUNT ON DIFFERENT WALLS? ==> Mounting on wood wall or wood stud -1 Use the hanger wood base for positioning, make use the base is vertically positioned. -2 Screw the long black screws through pilot holes into the wood wall or wood stud directly by using a screw driver. -3 Push the hanger body into the base and turn it (logo facing up) to final installation position. ==> Mounting on dry wall -1 Stick the position sticker on the dry wall, make use the sticker is vertically positioned. -2 Turn the screws clockwise into the dry wall at the position dots and screws out the screws counterclockwise, to make 2 holes. -3 Turn clockwise the drywall anchors into the holes till the end.Put on the wood base and screw the black long screws into the drywall anchors via the pilot holes in the base. -4 Push the hanger body into the base and turn it (logo facing up) to final installation position. ==> Mounting on bricks wall - Stick the position sticker on the bricks wall, make use the sticker is vertically positioned. -1 Use an electric drill to make 2 holes at the position dots, pay attention to the drill bit is as the same specifications described on the position sticker. -2 Use a hammer to knock the brick wall anchors into the 2 holes. -3 Put on the wood base and screw the black long screws into the bricks wall anchors via the pilot holes in the base. -4 Push the hanger body into the base and turn it (logo facing up) to final installation position.

GRN6593118

4.8 inches

4.0 inches

1.3 pounds

8.1 inches

Good Condition

333 West Seymour Ave., Cincinnati OH 45216