Malco

Good Condition

For in-floor radiant heating installations. This easy- loading manual stapler, with magazine feed, operates from a standing position to quickly and easily secure a layout of PEX pipe (polyethylene cross-linked tubing) to a foamboard base. Malco's efficient, ergonomic, stapler design offers maximum control for comfortable one-handed, one-stroke staple insertion. The stapler head holds the PEX in place as staples are fed, via a non-stick polymer slide, to the plunger assembly. A leaf-spring controlled stop sets up each staple to avoid risk of deforming connections or jamming the stapler. The durable, lightweight magazine slide is made of a solid, one-piece engineered-polymer which balances the tool by directing the weight over the stapler head. An in-line D-grip correctly positions the user's hand and wrist for applying downward pressure while stapling, and when lifting and moving the tool. Exclusive Malco plastic foamboard staple designs accommodate 3/8, 1/2 or 5/8-in. (9.5, 2.7 or 15.1 mm) PEX and feature dual barbs for increased bite and holding power. These staples are also compatible with most other foamboard stapling systems. Malco 1-1/2 inch (38.1 mm) staples are designed for 1 inch (25.4 mm) foamboard. Additional barbs on 2-1/2 inch (63.5 mm) staples "double the holding power" in 2 inch (50.8 mm) foamboard. Discreet micro welds on the 25-piece staple loading strips separate cleanly as they are engaged in the stapler mechanism, and a staple weight added to the magazine slide ensures a smooth steady feed for uninterrupted stapling. A retractable wire-form stand allows the stapler to remain upright and spill-proof when not in use or when reloading staples. From the Manufacturer For in-floor radiant heating installations. This easy-loading manual stapler, with magazine feed, operates from a standing position to quickly and easily secure a layout of PEX pipe (polyethylene cross-linked tubing) to a foamboard base. Malco's efficient, ergonomic, stapler design offers maximum control for comfortable one-handed, one-stroke staple insertion. The stapler head holds the PEX in place as staples are fed, via a non-stick polymer slide, to the plunger assembly. A leaf-spring controlled stop sets up each staple to avoid risk of deforming connections or jamming the stapler. The durable, lightweight magazine slide is made of a solid, one-piece engineered-polymer which balances the tool by directing the weight over the stapler head. An in-line D-grip correctly positions the user's hand and wrist for applying downward pressure while stapling, and when lifting and moving the tool. Exclusive Malco plastic foamboard staple designs accommodate 3/8, 1/2 or 5/8-in. (9.5, 2.7 or 15.1 mm) PEX and feature dual barbs for increased bite and holding power. These staples are also compatible with most other foamboard stapling systems. Malco 1-1/2 inch (38.1 mm) staples are designed for 1 inch (25.4 mm) foamboard. Additional barbs on 2-1/2 inch (63.5 mm) staples "double the holding power" in 2 inch (50.8 mm) foamboard. Discreet micro welds on the 25-piece staple loading strips separate cleanly as they are engaged in the stapler mechanism, and a staple weight added to the magazine slide ensures a smooth steady feed for uninterrupted stapling. A retractable wire-form stand allows the stapler to remain upright and spill-proof when not in use or when reloading staples.The tool has a minimum fill level line. If the tool is cycled with the staples below the minimum fill line, it can cause the tool to jam up.

FBSN

ORG5736938

12.6 inches

3.4 inches

7.3 pounds

37.3 inches

Good Condition

7405 Industrial Road, Florence KY 41042