Wellmet

Good Condition

Wellmet Assembly Required Lampshade for Table Lamp,Bedside Lamp,Floor Lamp,Fabric Drum Lampshade Classic Modern Style,Spider Fitter. The lampshade comes apart,Assembly required,needs take 10 minutes to finish. The top and bottom rings are made of plastic,But it’s enough to support the fabric. The lampshades can only be used on table lamps or bedside lamp,floor lamp with spider fitter required a metal harp.(harp not include in package.) Recommend measuring to your existing lampshade,a replacement harp may be needed for a proper fit if changing height of shade. Wellmet Assembly required Drum Lampshades Install Guide Using a screwdriver to tighten the screws of metal support first.Second,Putting the top and bottom rings together.( each ring is in three parts.)And pressing the top and bottom rings to the fabric via zip lock strips of plastic.Please make sure the front side of top ring is upside (the side which can see the metal screws is the front side) before put it on the shade of plastic grooves.)Then pressing the fabric again and remove the double-sided tape on one end of the shade and press the two together.Finally,Put the lampshade on your lamp,the five color and size are matches the most of lamp. Why does the lampshades need to assemble? We fully understand how maddening when our customer received a damaged lamp shades? so provides a ASSEMBLY NEEDED LAMPSHADES which solves the problem that is easy to be damaged in-transportation. In addition,only takes you 10 minutes,same as you do simple handwork at home. you can watch the video about installtion guide. Reminder: The lampshade comes apart,had to be assembled. If you can not accept,do not buy it. the side of TOP RING which can see the metal screws is the front side. The Fabric comes rolled up,Put a book on the end of fabric to make it spreaded when you install . Standard top ring with spider fitter requires a harp.(harp not include in package.) Read more Measuring lamp shades for table lamps Most table lamps take a shade with a bottom diameter of 16" or less, unless the table lamp is especially tall. "Mini" table lamps will need a much smaller shade. Measure the lamp's height from the bottom of the base to just below the bulb socket. Try to find a lampshade with a bottom width approximately equal to this measurement. A good height for lamp shades for table lamps is about 3/4 of the width of the shade, or 3/4 the height of the base up to the socket. You'll want to make sure that when the lampshade is positioned on the lamp, it will be tall enough to cover the top of the lamp fitter, and also hide the hardware, socket and part of the neck of the lamp base. When you view the lamp from the side you shouldn't see the hardware parts. Read more Measuring lamp shades for floor lamps Floor lamps take a shade with a bottom diameter of 16" or 18" or larger. Similar rules apply as for table lamp shades, where the shade needs to be tall enough to cover the hardware so that you don't see the lamp socket or fitter from the side. Floor lamps typically require a slightly larger shade than table lamps. Also due to the height of the lamp, they tend to look better with a drum or floor-style shade. A floor shade is almost a drum shade, except the sides are slightly slanted. This shape complements the proportions of the floor lamp. Read more Linen Lamp Shades Linen is all the rage. A Linen lamp shade suits many modern homes where beige linen and light browns provide a soft, comforting and nurturing environment. Linen shades can complement well with brown furniture or perhaps a beige couch. Often a linen lamp shade will complement a fancy decorated lamp base well. Read more

DS-TLS

ORG4887001

4.9 inches

4.8 inches

1.0 pounds

12.6 inches

Good Condition

967 Goodale Blvd, Columbus OH 43212