STOCK IMAGE
Auction Ended
Mini Chamfering Tool 45 Degree Handheld Metal Deburring Trimming Chamfering Machine Pneumatic Beveling Machine, Light Linear Air Chamfer Tool Arc Edge Beveler with Precision Blade Inserts
Sold
As Is
QTY 1
$4.40
MSRP
MSRP is a sample online retail price.
$37.00
Last Update:
09/09/2024, 7:53 PM ESTItem Information
MSRP:
MSRP is a sample online retail price.
$37.00
Brand:
Generic
Condition:
As Is
Description:
Specifications - Chamfering Range: 0-0.9mm (0-0.5mm recommended) - Chamfering Capacity: C0.1-C2 - Depth: 0.1-0.9mm - Chamfering Hole: ? ?8mm - Thickness of Chamfering Metal: >3mm - Idle Speed: 30,000RPM - Air Consumption: 0.4/min - Air Inlet: 1/4 in Pressure: 0.4-0.6MPAPackage Included - 1 x 45° mini chamfering machine kitNOTICE TO USE 1. Before using the new machine and after continuous use for around 3 hours, please inject pneumatic tool oil about 4C.C into the air inlet. 2. After injecting the pneumatic tool oil, wait about 10 seconds for the internal parts of the grinder be lubricated. 3. The output of the air compressor (air pump) is about 6-8kg. Generally, most of the compressed gas of a traditional air compressor contains water, and its piston brings out a small amount of the lubricating oil. If the oil-water separator is not used, water, oil and gas will enter the inside of the machine and will stay for a long time. The occurrence of adhesion slows down the rotation of the machine, resulting in insufficient speed and torque. In this way, inject the pneumatic tool oil into the air inlet, then the machine can work normally after idling for about 10s.
Lot Code:
BLU6642532
Width:
4.0 inches
Depth:
2.1 inches
Weight:
1.0 pounds
Length:
6.3 inches
Additional Info:
As Is
Pickup Location:
2224 Waycross Road, Cincinnati OH 45240
Auction Number
WAY2401326
