HYYT

Good Condition

Compatible with: Motorola Moto G7 Plus XT1965-2 screen replacement Items in the package: ----> 1 LCD display for Motorola Moto G7 Plus XT1965-2 ----> 1 Set of tools ----> 1 Tempered film Installation notes: Tip 1: Check if the Motorola Moto G7 Plus screen is in good condition before installing and test it. ----> Do not remove the protective film or The label during the test. Pay attention to static electricity problems, install the screen in an environment with fine static electricity. Before proceeding with installation, test the product first and make sure that the mobile phone has been connected via ESD (electrostatic discharge). This prevents static electricity damage the electronic components of the phone. Tip 2: Simulation test. ----> The Motorola G7 Plus replacement screen is in glass, which is fragile. It is strongly recommended to take the test before installation. Please simulate the test if the phone is disconnected (motherboard + LCD or screen), connect the audio cable and a new backup power supply, then turn on the test. If the test is normal, install it. If it cannot be viewed normally, contact us as soon as possible. Do not install the phone with the force. Tip 3: Do not bend the cable. ----> During installation and test, make sure the screen cable is not bent . A curvature greater than 90 degrees will cause a black view. Tip 4: Black screen phenomenon ----> If your phone has a black screen during the installation process, Keep the power button and the volume button simultaneously. If the phone vibrates, it is because the main cable is not installed correctly. Then reinstall the Motorola Moto G7 Plus LCD Display Replacement.

BLU6496520

7.1 inches

1.5 inches

0.5 pounds

8.1 inches

Good Condition

2809 Howard Litzler Drive, Latonia KY 41015