MAYASAF

As Is

MAYASAF is an auto parts manufacturer and seller in the US that offers a wide range of replacement auto parts. All of the auto-parts we offered are manufactured using the latest international equipment and state- of-the-art technology to meet OEM standards so you can replace your aging, worn out, or failed equipment with a direct fit solution. Whether you are putting the car up on blocks to do it yourself or looking to save money by bringing your own parts to your local mechanic, choosing MAYASAF will add life to your vehicle. EPA CERTIFIED BUT Non-CARB COMPLIANT Please do NOT buy this product if you are in California or New York (Or your vehicle required to meet California emission standards). Lower auto exhaust back pressure Reduces the emission of NOx More horsepower Free up torque Much better sound MAYASAF Catalytic converter Application 2009-2017 for Chevy Traverse 3.6L 2007-2017 for GMC Acadia 3.6L 2008-2017 for Buick Enclave 3.6L 2007-2010 for Saturn Outlook 3.6L Make sure fitment first, thanks a bunch! Illegal for use on vehicles required to meet California emission standards. (Do not buy it if your vehicle was registered in CA or NY) Cutting and welding may required, professional installation is highly recommended. Read more Catalytic converter structure Catalytic converter composed of shell, shock-absorbing layer, substrate, carrier, and catalyst. The substrate material of the catalyst is mainly honeycomb ceramics, the structure increased the effective contact area with the exhaust gas to the most. Ceramics provide strength with lower density, the resistance of high temperature, small coefficient of thermal expansion, etc. The carrier coating is usually Alumina (Al2O3), which compatibility both well with ceramics and catalyst, and provide good specific surface area and thermal stability. And the precious metal catalyst is Rh, Pt, Pd. (Platinum Group Metals) Conversion efficiency with A/F (Air-Fire ratio) and T(temperature) Only at the ideal air-fuel ratio (A/F 14.7:1), the conversion efficiency of these three pollutants will be relatively highest at the same time. And the temperature is extremely important for a catalyst too, in order to maximize the efficiency of the converter reaction. Usually, the best temperature range is 400-800?. The Light-Off Temperature is 250?, between 250-400?, the conversion efficiency would drop sharply. And beyond 800?, the precious metal catalyst would be aging rapidly. The common causes of failure The temperature is too high. when exceeds 1000 ?, the catalyst in its inner layer will sinter and die, even fires. Chronic poisoning. S, Pb, P, Zn and their formation of oxide particles after combustion in the engine are easy to be adsorbed on the catalyst. Surface-area carbon. The soot emitted by the engine would adhere to the surface of the catalyst. Exhaust deterioration. aging or overuse leads to failure. Differential use. The installation and application should be strictly matched according to the engine model. Oxygen sensing failure. Ensure the oxygen sensor is working properly to achieve the best Air-Fire ratio, Oxygen sensing failure would cause lots of problems. About the Code P0420/P4030 This catalytic converter can eliminate the check engine light on caused by code P0420 - catalyst system efficiency below threshold. Therefore, before replacing a catalytic converter, please make sure your O2 sensors still work well. Faulty sensors can cause Oxygen sensor carbon deposition, ceramic chipping, heater resistance wire burnout, internal circuit disconnection, and damage to your fuel economy as well as the service life of the converter. Read more

MSFTWCC8007

GRN6601430

1.0 inches

1.0 inches

5.0 pounds

5.0 inches

As Is

21160 Drake Rd, Strongsville Ohio 44149